KT3200 Timer Socket Thermostat Digital Temperature Controller Heating Cooling Day Night Control EU/UK/FR/AU Plug Energy Saving
€31,55 EUR
In stock!
SPECIFICATIONS
Certification: CE
Cable Length: 3M
Is Smart Device: no
Display Size: 1.9 Inches & Under
Usage: Household
Choice: yes
semi_Choice: yes
Introduction:
M1 TC: Temperature control mode
Set the start and stop temperature Heating mode: start temperature < stop temperature Cooling mode: start temperature > stop temperature.
M2 TC+Timer: Day/Night temperature control
Set the clock, time1, time 2, TC 1, TC 2 In each 24hours, Daytime (time1~time2) run TC1 program Night time (time2~time1) run TC2 program
M3 Timer: 2 timer period timer only
Set the clock, time1, time2Time1~Time2: Output on Time2~Time1: Output off
Warning: 1. Before you use this unit, check on the plastic shell Do not use it if there is any damaged. 2. The relay is max 16A.Please use resistance load less than 14A.Inductive load less than 2A. 3. Do not use this unit in the environment of explosive much gas, steam or dusty. 4. Do not allow children to operate the device. 5. DO not disassemble the device by yourself
- The KT3200 temperature controller display the measured temperature, set the start and stop temperature to control the heating or cooling equipment.
- It also has time function to set day and night temperature independenty.
-
It is widely used in intelligent control such as heating, refrigeration, brewing, reptile, aquaculture greenhouse, home life and many other places.
- Power supply: 100~250VAC 50/60Hz
- Temperature control range: -40℃~120℃/-72℉~176℉
- ℃/℉ Switchable
- Setting time: 0-24h/Daily cycle timer
- Control accuracy: ±1℃/±1℉
- Sensor: NTC10K/B3950
- Output: Max 16A/230V EU/UK/FR/AU Plug
- Max 15A//120V US plug
- Reset function
- Temperature calibration function
- Memory function when power off
- Working Mode: M1 temperature control mode , M2 temperature control+timer , M3 Timer can be choosen
- All data except the clock will be saved after power failure.
- The clock needs to be reset when power on.
- If KT3200 work in M1 mode before power failure, it will automatically resume operation after power on again.
- If KT3200 work in M2 or M3 mode before power failure, you will need to reset the clock at first when power on again.
M1 TC: Temperature control mode
Set the start and stop temperature Heating mode: start temperature < stop temperature Cooling mode: start temperature > stop temperature.
M2 TC+Timer: Day/Night temperature control
Set the clock, time1, time 2, TC 1, TC 2 In each 24hours, Daytime (time1~time2) run TC1 program Night time (time2~time1) run TC2 program
M3 Timer: 2 timer period timer only
Set the clock, time1, time2Time1~Time2: Output on Time2~Time1: Output off
Warning: 1. Before you use this unit, check on the plastic shell Do not use it if there is any damaged. 2. The relay is max 16A.Please use resistance load less than 14A.Inductive load less than 2A. 3. Do not use this unit in the environment of explosive much gas, steam or dusty. 4. Do not allow children to operate the device. 5. DO not disassemble the device by yourself
Package Content:
- 1 x KT3200 thermostat timer with 3m temperature sensor
- 1 x Instruction
- 1 x Box
Have a question?
KT3200 Timer Socket Thermostat Digital Temperature Controller Heating Cooling Day Night Control EU/UK/FR/AU Plug Energy Saving